I had a blast driving the 02 today. Unfortunately on the way to Walmart to pick up somethings the U-joint started to come loose. One of the caps had backed out some causing a bad vibration. Luckily I was able to get the car parked and knock it back in with a screwdriver. Managed to get to Walmart, get the stuff and get back home with no further problems. But I'll have to park it until I can get it to a shop that can weld the cap in there good. I have to check out my other drive shaft to see what kind of weld it is supposed to be. The ones that were on this one are just small spot welds that apparently weren't good enough.
The write up on the drive shaft stuff will have to wait a little bit.
No comments:
Post a Comment